Worker loses part of his foot in animal feed pressing machinery incident

Animal feed manufacturer William Thompson (York) Ltd has been fined £500,000 for failing to protect the employee from dangerous parts of machinery

Chris Brayford
clock • 2 min read
A CCTV image of the pressing machine. HSE said there were only two bars of guarding above the rotating auger which enabled the worker’s foot to slip through to the blade. (HSE)
Image:

A CCTV image of the pressing machine. HSE said there were only two bars of guarding above the rotating auger which enabled the worker’s foot to slip through to the blade. (HSE)

An animal feed manufacturer in Yorkshire has been fined half a million pounds after a worker lost part of his foot in a machinery-related incident. William Thompson (York) Limited, based in Malton,...

To continue reading...

Already a member? Login for full access.

Login

New to Farmers Guardian? Register for 1 free article per week or become a member for unlimited access to essential farming news and insights.

article-img-580x358
Register for free Join Now

 

More on Rural crime

Rural crime up 24% in Northern Ireland as crisis deepens
Rural crime

Rural crime up 24% in Northern Ireland as crisis deepens

While overall UK crime fell by 6%, the cost affecting Northern Ireland has risen to over £2 million

Mia Willemsen
clock 30 May 2026 • 2 min read
Rural domestic abuse victims still being failed, report says
Rural crime

Rural domestic abuse victims still being failed, report says

Tackling domestic abuse requires the Government to confront inequality in how safety is designed and delivered, and to ensure rural victims, including children and families, are no longer overlooked

Chris Brayford
Chris Brayford
clock 29 May 2026 • 11 min read
Cost of rural crime drops to £41.5m, according to NFU Mutual report
Rural crime

Cost of rural crime drops to £41.5m, according to NFU Mutual report

Although the cost of rural crime across the UK fell by 6%, in Scotland it rose by 14% reaching £1.4 million

Mia Willemsen
clock 28 May 2026 • 5 min read